Emission profiling of diesel and gasoline cars at a city traffic junction_中国颗粒学会

在线阅读

Volurnes 72-75 (2023)

Volurnes 60-71 (2022)

Volurnes 54-59 (2021)

Volurnes 48-53 (2020)

Volurnes 42-47 (2019)

Volurnes 36-41 (2018)

Volurnes 30-35 (2017)

Volurnes 24-29 (2016)

Volurnes 18-23 (2015)

Volurnes 12-17 (2014)

Volurne 11 (2013)

Volurne 10 (2012)

Volurne 9 (2011)

Volurne 8 (2010)

Volurne 7 (2009)

Volurne 6 (2008)

Volurne 5 (2007)

Volurne 4 (2006)

Volurne 3 (2005)

Volurne 2 (2004)

Volurne 1 (2003)

在线阅读

Partic. vol. 18 pp. 186-193 (February 2015)
doi: 10.1016/j.partic.2014.06.008

Emission profiling of diesel and gasoline cars at a city traffic junction

Avinash Kumar Agarwala,*, Tarun Guptab, Prakhar Bothraa, Pravesh Chandra Shuklab

Show more

akag@iitk.ac.in

Highlights

    • Emissions of gasoline- and diesel-powered cars at simulated traffic junctions were investigated. • Gravimetric and real-time measurements of exhaust emissions were made at various idle conditions. • Particle number-size distribution and particle bound PAHs characterization were performed. • Trace metals of particulates exhausted were evaluated.

Abstract

In congested urban roads, cars must stop at intersections because of city traffic lights. As a result, pedestrians and traffic police personnel are exposed to pollutants emanating from the tailpipe of various vehicles at such city traffic junctions. In this study, various gasoline- and diesel-fueled cars complying with different emission standards were tested for their emissions in simulated city traffic junction conditions. The engine exhaust from these cars was subjected to physicochemical characterization at different engine speeds under no-load conditions. These engine conditions were chosen because the cars idle at different engine speeds at a city traffic junction. Gravimetric and real-time measurements were performed for the tailpipe exhaust sampled from these vehicles. Exhaust particles were collected on 47 mm diameter quartz filter papers and subjected to gravimetric analysis for determining the total particulate mass (TPM) and trace metals while the engines were operated at two different engine idling speeds, 1500 rpm (representing low idling) and 2500 rpm (representing high idling). At similar engine operating conditions, TPM and trace metals were lower for the exhaust from gasoline engines compared to the exhaust from diesel engines. Real-time measurements were performed for particle-bound poly-aromatic hydrocarbons (PAHs), particle number and size distribution, regulated gaseous emissions and smoke opacity of the exhaust at four different engine speeds, 1500, 2000, 2500, and 3000 rpm. Particle-bound PAHs showed a decreasing trend for the vehicles that complied with stricter vehicular emission standards. Higher particle peak number concentrations were observed for diesel exhausts compared to the results for gasoline exhaust. Regulated gaseous emissions were also compared.

Graphical abstract

Keywords

Traffic junctions; Traffic stop emissions; Particle number emission; Particle mass emissions; Diesel and gasoline fueled cars