pp. 1-228 (April 2023)
pp. 1-200 (March 2023)
pp. 1-138 (February 2023)
pp. 1-144 (January 2023)
pp. 1-108 (December 2022)
pp. 1-106 (November 2022)
pp. 1-122 (October 2022)
pp. 1-124 (September 2022)
pp. 1-102 (August 2022)
pp. 1-112 (July 2022)
pp. 1-138 (June 2022)
pp. 1-186 (May 2022)
pp. 1-124 (April 2022)
pp. 1-104 (March 2022)
pp. 1-120 (February 2022)
pp. 1-124 (January 2022)
pp. 1-214 (June 2021)
pp. 1-90 (December 2021)
pp. 1-222 (April 2021)
pp. 1-324 (October 2021)
pp. 1-200 (February 2021)
pp. 1-222 (August 2021)
pp. 1-208 (December 2020)
pp. 1-112 (October 2020)
pp. 1-210 (August 2020)
pp. 1-204 (June 2020)
pp. 1-218 (April 2020)
pp. 1-182 (February 2020)
pp. 1-104 (December 2019)
pp. 1-116 (October 2019)
pp. 1-130 (August 2019)
pp. 1-224 (June 2019)
pp. 1-226 (April 2019)
pp. 1-216 (February 2019)
pp. 1-132 (December 2018)
pp. 1-182 (October 2018)
pp. 1-116 (August 2018)
pp. 1-228 (June 2018)
pp. 1-154 (April 2018)
pp. 1-198 (February 2018)
pp. 1-118 (December 2017)
pp. 1-162 (October 2017)
pp. 1-138 (August 2017)
pp. 1-190 (June 2017)
pp. 1-220 (April 2017)
pp. 1-164 (February 2017)
pp. 1-176 (December 2016)
pp. 1-138 (October 2016)
pp. 1-144 (August 2016)
pp. 1-122 (June 2016)
pp. 1-166 (April 2016)
pp. 1-222 (February 2016)
pp. 1-118 (December 2015)
pp. 1-194 (October 2015)
pp. 1-212 (August 2015)
pp. 1-150 (June 2015)
pp. 1-184 (April 2015)
pp. 1-200 (February 2015)
pp. 1-172 (December 2014)
pp. 1-230 (October 2014)
pp. 1-178 (August 2014)
pp. 1-138 (June 2014)
pp. 1-150 (April 2014)
pp. 1-122 (February 2014)
pp. 619-792 (December 2013)
pp. 475-618 (October 2013)
pp. 359-474 (August 2013)
pp. 249-358 (June 2013)
pp. 119-248 (April 2013)
pp. 1-118 (February 2013)
pp. 649-788 (December 2012)
pp. 523-647 (October 2012)
pp. 397-522 (August 2012)
pp. 255-396 (June 2012)
pp. 145-253 (April 2012)
pp. 1-143 (February 2012)
pp. 545-662 (December 2011)
pp. 451-544 (October 2011)
pp. 319-450 (August 2011)
pp. 193-317 (June 2011)
pp. 101-191 (April 2011)
pp. 1-99 (February 2011)
pp. 491-644 (December 2010)
pp. 399-489 (October 2010)
pp. 301-397 (August 2010)
pp. 187-299 (June 2010)
pp. 81-185 (April 2010)
pp. 1-80 (February 2010)
pp. 421-512 (December 2009)
pp. 337-419 (October 2009)
pp. 231-335 (August 2009)
pp. 161-229 (June 2009)
pp. 93-160 (April 2009)
pp. 1-91 (February 2009)
pp. 389-583 (December 2008)
pp. 289-388 (October 2008)
pp. 225-288 (August 2008)
pp. 131-222 (June 2008)
pp. 59-129 (April 2008)
pp. 1-58 (February 2008)
pp. 363-428 (December 2007)
pp. 305-361 (October 2007)
pp. 247-304 (August 2007)
pp. 193-246 (June 2007)
pp. 1-191 (April 2007)
pp. 259-361 (December 2006)
pp. 211-258 (October 2006)
pp. 103-210 (July 2006)
pp. 47-102 (April 2006)
pp. 1-46 (February 2006)
pp. 289-404 (December 2005)
pp. 243-288 (October 2005)
pp. 197-242 (August 2005)
pp. 151-196 (June 2005)
pp. 1-150 (April 2005)
pp. 235-280 (December 2004)
pp. 189-234 (October 2004)
pp. 139-188 (August 2004)
pp. 93-138 (June 2004)
pp. 47-92 (April 2004)
pp. 1-46 (February 2004)
pp. 231-276 (December 2003)
pp. 185-230 (October 2003)
pp. 139-183 (September 2003)
pp. 93-138 (July 2003)
pp. 47-92 (June 2003)
pp. 1-46 (April 2003)
Partic. vol. 30 pp. 102-110 (February 2017) doi: 10.1016/j.partic.2016.06.002
Minimising the spread of residence-time distribution for flat and heaped powders in a wedge-shaped planar hopper
Luke Fullarda, *, Clive Daviesb
Highlights
Abstract
A wedge-shaped planar mass-flow hopper system was modelled using stress-field theory as found in the literature. The authors present governing equations for stress and velocity fields under a radial-flow assumption in a converging hopper. The velocity in the silo above the hopper is modelled as plug flow. Two set-ups are modelled, one where powder layers in the hopper are assumed to be flat, and the second in which the layers are heaped at some characteristic angle. The ejection times and residence-time distributions are calculated and presented for a range of heap angles. For realistic heap angles, the spread of the residence-time distribution decreases with increasing heap angle; in one case, the spread is halved to a well-defined limit. At this limit (the critical heap angle) the geometry of the hopper can be optimised to minimise the spread of the residence-time distribution, and hence to minimise predicted mixing in the system. We present examples of curves for a variety of parameters that minimise the predicted mixing in the hopper–silo system.
Graphical abstract
Keywords
Residence-time distribution; Radial stress field; Hopper; Heaped layers; Granular